2016 Corvette C7 Z06 — BC Forged HCA510S in Gloss Black
This finished set of BC Forged HCA510S wheels was built for a 2016 Chevrolet Corvette C7 Z06 with factory carbon ceramic brakes.
This set: gloss black, front 20×10 and rear 21×12
The specification for this job is a full gloss-black HCA510S: gloss black lip, gloss black face, black hardware, and black tire valves. The sizes are staggered. The fronts are 20 × 10.0J; the rears are 21 × 12.0J. The bolt pattern is 5x120, and the center bore is 70.3 mm.
Those last two figures matter as much as the diameters. On the official HCA510S listing, this is a custom-order wheel: sizes run from 18" to 23", and both the hub (H) and P.C.D. are made to the order. 5x120 and a 70.3 mm center bore are the pattern and bore specified for this C7 Z06 set. Confirm them when you order, along with width, offset, and brake clearance — especially on a Z06 that has the factory carbon ceramic brakes. This article does not include a measured clearance over those rotors; that check belongs in the order.
What a modular 2-piece HCA510S is
On the CarGym product page, the HCA510S is a modular two-piece forged wheel in 6061-T6 aluminum, with a step-lip and deep-concave design. A two-piece modular wheel is built with a separate face and an outer lip, joined around the circumference by hardware. On this set that hardware is black, so the fasteners sit with the gloss-black face and lip rather than as a contrasting ring.
The step lip is the stepped profile at the outer rim; the deep-concave design is the dished face that drops from the lip toward the center cap. Both are visible on this finished set. The listing also notes anti-slip knurling, custom colors and combinations, center-cap options, and a center-lock conversion kit as available options. This C7 set is a conventional 5x120 bolt-pattern build with a BC Forged center cap — not a center-lock conversion. Other colors are offered, and the official product gallery includes other finishes, so do not assume every HCA510S looks like this gloss-black set.
The listing describes the HCA510S as made to order. Confirm the exact size, offset, finish, and brake clearance for your chassis on the product page and with the shop before ordering. Shop the BC Forged Modular 2-Pieces HCA510S Forged Wheels on cargym.com.