Front Conversion vs Full Kit: McLaren 12C, 625C and 650S to 675LT
A conversion kit is not just a body kit with a more dramatic name. On a McLaren MP4-12C, 625C, or 650S, it is a way to change specific panels so the car takes on the look of a 675LT — and the listings at CarGym are not the same job. One is a front-end package, one is a left-and-right fender set, and one is a full conversion that also covers the sides, the rear, and a stainless steel exhaust.
All three are listed as 675LT style parts, in dry carbon fiber, for the McLaren MP4-12C / 625C / 650S. None of the pages describes them as genuine McLaren factory 675LT parts.
What the front conversion includes
The McLaren MP4-12C / 625C / 650S to 675LT Front Conversion Kit is a front-end package. The listing’s “Full Kit Includes” list is limited to the nose of the car:
- 675LT Style Dry Carbon Fiber Front Bumper
- 675LT Style Dry Carbon Fiber Lip Spoiler & Undercover
- 675LT Style Dry Carbon Fiber L & R Front Fender Set
- 675LT Style Dry Carbon Fiber Front Hood / Bonnet
- 675LT Style Front Trunk Tub
That is the useful distinction. A front conversion changes the bumper, the lip and undercover, the fenders, the hood, and the front trunk tub. It does not, on this listing, include side skirts, rear quarters, a rear bumper, or a spoiler. If you only want the 675LT-style face, this is the package whose contents match that job.
When a fender set is the whole order
If the rest of the front end is already in place, or you are replacing a single pair of panels, the McLaren 675LT Front Fenders Set for MP4-12C / 625C / 650S is listed as just that: a 675LT Style Dry Carbon Fiber L & R Front Fender Set. It is not a front conversion on its own.
The vented fender is one of the most visible 675LT-style cues, but a fender set will not change the bumper, hood, or lip.
What the full conversion adds
The McLaren MP4-12C / 625C / 650S to 675LT Full Conversion Body Kit starts with the same five front pieces as the front conversion, then adds the sides and the rear, plus an exhaust:
- 675LT Style Dry Carbon Fiber L&R Side Intake Blades
- 675LT Style Dry Carbon Fiber L&R Side Skirt
- 675LT Style Dry Carbon Rear Quarter Panel
- 675LT Style Dry Carbon Fiber Rear Engine Cover
- 675LT Style Dry Carbon Fiber Rear Bumper with Diffuser
- 675LT Style Dry Carbon Fiber Rear Air Brake Spoiler
- 675LT Stainless Steel Exhaust System
The floor layout makes the difference obvious: a full conversion is a whole-car package, not a longer name for the front kit. The rear bumper with diffuser, the air brake spoiler, the rear engine cover, and the stainless steel exhaust are only on the full-kit list.
Finish options, headlights, and lead time
Each of the three listings is offered in four finishes: Gloss 2x2 Weaves Carbon Fiber, Matte 2x2 Weaves Carbon Fiber, Gloss Forged Carbon Fiber, and Matte Forged Carbon Fiber. The included parts are described as dry carbon fiber, except the front trunk tub, which is not given a material in the list, and the full kit’s stainless steel exhaust.
All three pages carry the same fitment note: an MP4-12C needs OEM 650S headlights for this conversion. That is a 12C-specific requirement, not something to assume is already on the car.
The front and full kits are designed for the McLaren MP4-12C / 625C / 650S. The pages ask you to confirm facelift and bumper style before ordering, and they state that other generations use different geometry and will not fit. The fender set uses the same donor cars in its title, and it carries the same 12C headlight note.
All three are made to order and take 3–4 weeks to ship after order confirmation. The full conversion listing recommends professional installation. A package this large involves bumper, fender, hood, and — on the full kit — quarter-panel and rear bumper work, so panel gaps and fasteners need to be set correctly.
A short checklist before you buy
A short checklist, taken from the listings themselves:
- Confirm the car is a McLaren MP4-12C, 625C, or 650S, and confirm the facelift and bumper style.
- If the car is an MP4-12C, plan for OEM 650S headlights; the listings say that model needs them for this conversion.
- Choose the package that matches the work: the fender set alone; the front conversion (bumper, lip and undercover, fenders, hood, and front trunk tub); or the full conversion, which adds the side intake blades, side skirts, rear quarter panels, rear engine cover, rear bumper with diffuser, rear air brake spoiler, and stainless steel exhaust.
- Pick a finish from the four options listed on each page: gloss or matte 2x2 weaves, or gloss or matte forged carbon fiber.
- Plan for a made-to-order lead time of 3–4 weeks after confirmation, and for professional installation on a full conversion.
The three parts discussed above are the McLaren MP4-12C / 625C / 650S to 675LT Front Conversion Kit, the McLaren 675LT Front Fenders Set for MP4-12C / 625C / 650S, and the McLaren MP4-12C / 625C / 650S to 675LT Full Conversion Body Kit.