{"title":"Ferrari SF90 Body Kit","description":"","products":[{"product_id":"dmc-ferrari-sf90-carbon-fiber-air-guide-side-wall-fit-the-stradale-assetto-fiorano-coupe","title":"DMC Ferrari SF90 Carbon Fiber Air Guide Side Wall fit the Stradale \u0026 Assetto Fiorano Coupe","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe iconic DMC Rear Diffuser for the Ferrari SF90, made from Carbon Fiber. DMC products are certified by TUV, a German government approved authority for car safety standards. This product is not yet ready, but please contact us about its status.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe new SF90 is a superb looking car however from a distance with the softer curves than the its LaFerrari sibling, it can look a little tame. We aim to change that with our new range of Ferrari SF90 Carbon. The DMC Carbon Diffuser really is the finisher to any cars rear fascia. The SF90 Stradale from factory has quite a tame looking rear fascia, that really doesn’t do a proper Ferrari any justice. The DMC carbon creation fits into the factory design, and a more aggressive look. It is absolutely integrated with the OEM lines, not looking aftermarket at all.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Carbon Fiber Diffuser is made up with lightweight and strong Carbon Fiber, produced via vacuum infusion giving both great strength and superior finish. Once the part has been produced and pulled from the mould, it is checked and tested thoroughly before heading to lacquer. Each part is inspected further and checked for tolerances before being hand and machine polished, followed by being waxed and sealed in with high content Carnauba products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a replacement part, the OEM bumper needs to be removed for installation. Although fitting is quite straight forward we do always recommend using a trained professional to undertake the install. We estimate around 180 minutes to fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFull SF90 Rear Diffuser Unit x 1\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGel Coat:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDMC Products come with a free Gloss or Matte Coating on all Carbon Fiber items, please leave a note at check out which one you like. If you don’t specify we will add a gloss base layer. However we suggest you to add one additional layer to match your country’s local UV and weather requirements as they differ throughout the world. We also suggest to wax, polish and seal the item further, even though we include a base seal of high quality carnauba product. This can be protective in regions that have high humidity or rain.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it in stock?\u003c\/summary\u003e\n\u003cp\u003eThis is made to order and takes 3-4 weeks to ship out after order confirmation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cp\u003eShop this DMC Ferrari SF90 Carbon Fiber Air Guide Side Wall fit the Stradale \u0026amp; Assetto Fiorano Coupe at \u003cstrong\u003eCarGym\u003c\/strong\u003e with worldwide shipping and payment in all major currencies.\u003c\/p\u003e\n","brand":"DMC","offers":[{"title":"pre-peg carbon (extra light with line structure)","offer_id":42624853016732,"sku":null,"price":25700.0,"currency_code":"HKD","in_stock":true},{"title":"forged carbon (extra light with marble structure)","offer_id":42624853049500,"sku":null,"price":33500.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0566\/6534\/2108\/files\/ezgif-1-497167d85d.jpg?v=1791480036"},{"product_id":"dmc-ferrari-sf90-carbon-fiber-front-lip-add-ons-fit-the-oem-coupe-spider-assetto-fiorano","title":"DMC Ferrari SF90 Carbon Fiber Front Lip Add-Ons fit the OEM Coupe \u0026 Spider \u0026 Assetto Fiorano","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\n\u003cp\u003eGive your Ferrari SF90 a more planted, motorsport-inspired front aero presence with this front lip. The carbon fiber finish delivers a high-impact appearance upgrade grounded in the facts listed for this product.\u003c\/p\u003e\n\u003cp\u003eBuilt with a durable \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e construction, finished in \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eInstall\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThis is an add-on part, the OEM rear base doesn’t need to be removed for installation. Although fitting is quite straight forward we do always recommend using a trained professional to undertake the install. We estimate around 30 minutes to fit.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003esharper front aero presence design\u003c\/strong\u003e — sharper front aero presence\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon fiber\u003c\/strong\u003e — finish that pairs cleanly with factory paint and trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon fiber\u003c\/strong\u003e — lightweight motorsport material with a clear carbon weave look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet \/ pair where listed\u003c\/strong\u003e — confirm whether the listing includes left and right pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eDesigned for the \u003cstrong\u003eFerrari SF90\u003c\/strong\u003e. Confirm your facelift \/ bumper style before ordering; send a photo of the install area if you want a fitment check.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits: Ferrari SF90 with the compatible factory mounting\u003c\/li\u003e\n\u003cli\u003eConfirm this is the correct front lip for your bumper \/ chassis generation\u003c\/li\u003e\n\u003cli\u003eVariants: PRE-PEG CARBON (EXTRA LIGHT WITH LINE STRCUTURE), FORGED CARBON (EXTRA LIGHT WITH MARBLE STRUCTURE)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart\u003c\/td\u003e\n\u003ctd\u003eFront Lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eFerrari SF90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall\u003c\/td\u003e\n\u003ctd\u003eConfirm install method for your chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhy upgrade\u003c\/h3\u003e\n\u003cp\u003eStock front bumpers often leave a tall gap at the nose. A styled front lip or splitter is one of the highest-impact aero upgrades for the Ferrari SF90: it lowers the visual stance, photographs well, and stays reversible if you keep the original piece.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdetails open\u003e\n\u003csummary\u003eWill this fit my Ferrari?\u003c\/summary\u003e\n\u003cp\u003eIt is made for the \u003cstrong\u003eFerrari SF90\u003c\/strong\u003e. Other generations use different geometry and will not fit — always match chassis code, year, and facelift \/ bumper style.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it real carbon fiber?\u003c\/summary\u003e\n\u003cp\u003eThis version is listed as \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e. Material called out in the listing: \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it replace the whole bumper?\u003c\/summary\u003e\n\u003cp\u003eUsually no — this is the listed front lip only, not an entire vehicle reskin. It is intended to work with the OEM mounting concept when fitment matches.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDo I need a body shop to install it?\u003c\/summary\u003e\n\u003cp\u003eMany owners have a body shop or detailing shop handle the install so panel gaps and fasteners are set correctly. Experienced DIY installers can also complete straightforward direct-fit pieces with care and the right tools.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow can I confirm fitment before I buy?\u003c\/summary\u003e\n\u003cp\u003eMessage CarGym with your model year, chassis code, and a clear photo of the install area — we will confirm compatibility before you order.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it in stock?\u003c\/summary\u003e\n\u003cp\u003eThis is made to order and takes 3-4 weeks to ship out after order confirmation.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cp\u003eShop this DMC Ferrari SF90 Carbon Fiber Front Lip Add-Ons fit the OEM Coupe \u0026amp; Spider \u0026amp; Assetto Fiorano at \u003cstrong\u003eCarGym\u003c\/strong\u003e with worldwide shipping and payment in all major currencies.\u003c\/p\u003e","brand":"DMC","offers":[{"title":"PRE-PEG CARBON (EXTRA LIGHT WITH LINE STRCUTURE)","offer_id":42624905740444,"sku":null,"price":21800.0,"currency_code":"HKD","in_stock":true},{"title":"FORGED CARBON (EXTRA LIGHT WITH MARBLE STRUCTURE)","offer_id":42624905773212,"sku":null,"price":28800.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0566\/6534\/2108\/files\/ezgif-1-497167d85d_06ca64c8-c976-4971-8281-eebf310aeb24.jpg?v=1791480036"},{"product_id":"dmc-ferrari-sf90-carbon-fiber-rear-diffuser-fits-the-oem-coupe-spider-assetto-fiorano-stradale","title":"DMC Ferrari SF90 Carbon Fiber Rear Diffuser fits the OEM Coupe \u0026 Spider Assetto Fiorano \u0026 Stradale","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\n\u003cp\u003eGive your Ferrari SF90 a cleaner, more purposeful rear exit with this rear diffuser. The carbon fiber finish delivers a high-impact appearance upgrade grounded in the facts listed for this product.\u003c\/p\u003e\n\u003cp\u003eBuilt with a durable \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e construction, finished in \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eInstall\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThis is a replacement part, the OEM bumper needs to be removed for installation. Although fitting is quite straight forward we do always recommend using a trained professional to undertake the install. We estimate around 180 minutes to fit.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ecleaner rear exit aero design\u003c\/strong\u003e — cleaner rear exit aero\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon fiber\u003c\/strong\u003e — finish that pairs cleanly with factory paint and trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon fiber\u003c\/strong\u003e — lightweight motorsport material with a clear carbon weave look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet \/ pair where listed\u003c\/strong\u003e — confirm whether the listing includes left and right pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eDesigned for the \u003cstrong\u003eFerrari SF90\u003c\/strong\u003e. Confirm your facelift \/ bumper style before ordering; send a photo of the install area if you want a fitment check.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits: Ferrari SF90 with the compatible factory mounting\u003c\/li\u003e\n\u003cli\u003eConfirm this is the correct rear diffuser for your bumper \/ chassis generation\u003c\/li\u003e\n\u003cli\u003eVariants: PRE-PEG CARBON (EXTRA LIGHT WITH LINE STRUCTURE), FORGED CARBON (EXTRA LIGHT WITH MARBLE STRUCTURE)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart\u003c\/td\u003e\n\u003ctd\u003eRear Diffuser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eFerrari SF90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall\u003c\/td\u003e\n\u003ctd\u003eConfirm install method for your chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhy upgrade\u003c\/h3\u003e\n\u003cp\u003eThe rear valance is a large flat area on many cars. A diffuser adds structure and exit-aero character to the Ferrari SF90 without requiring a full bumper replacement when fitment matches.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdetails open\u003e\n\u003csummary\u003eWill this fit my Ferrari?\u003c\/summary\u003e\n\u003cp\u003eIt is made for the \u003cstrong\u003eFerrari SF90\u003c\/strong\u003e. Other generations use different geometry and will not fit — always match chassis code, year, and facelift \/ bumper style.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it real carbon fiber?\u003c\/summary\u003e\n\u003cp\u003eThis version is listed as \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e. Material called out in the listing: \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it replace the whole bumper?\u003c\/summary\u003e\n\u003cp\u003eUsually no — this is the listed rear diffuser only, not an entire vehicle reskin. It is intended to work with the OEM mounting concept when fitment matches.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDo I need a body shop to install it?\u003c\/summary\u003e\n\u003cp\u003eMany owners have a body shop or detailing shop handle the install so panel gaps and fasteners are set correctly. Experienced DIY installers can also complete straightforward direct-fit pieces with care and the right tools.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow can I confirm fitment before I buy?\u003c\/summary\u003e\n\u003cp\u003eMessage CarGym with your model year, chassis code, and a clear photo of the install area — we will confirm compatibility before you order.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it in stock?\u003c\/summary\u003e\n\u003cp\u003eThis is made to order and takes 3-4 weeks to ship out after order confirmation.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cp\u003eShop this DMC Ferrari SF90 Carbon Fiber Rear Diffuser fits the OEM Coupe \u0026amp; Spider Assetto Fiorano \u0026amp; Stradale at \u003cstrong\u003eCarGym\u003c\/strong\u003e with worldwide shipping and payment in all major currencies.\u003c\/p\u003e","brand":"DMC","offers":[{"title":"PRE-PEG CARBON (EXTRA LIGHT WITH LINE STRUCTURE)","offer_id":42624936345756,"sku":null,"price":60000.0,"currency_code":"HKD","in_stock":true},{"title":"FORGED CARBON (EXTRA LIGHT WITH MARBLE STRUCTURE)","offer_id":42624936378524,"sku":null,"price":78000.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0566\/6534\/2108\/files\/SF90_CarbonFiber_Diffuser-416x277.jpg?v=1791480038"},{"product_id":"dmc-ferrari-sf90-carbon-fiber-side-skirts-fit-the-oem-coupe-spider-stradale-assetto-fiorano","title":"DMC Ferrari SF90 Carbon Fiber Side Skirts fit the OEM Coupe \u0026 Spider Stradale \u0026 Assetto Fiorano","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\n\u003cp\u003eGive your Ferrari SF90 a lower, more athletic side profile with this side skirt. The carbon fiber finish delivers a high-impact appearance upgrade grounded in the facts listed for this product.\u003c\/p\u003e\n\u003cp\u003eBuilt with a durable \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e construction, finished in \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eInstall\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThis is a replacement part, the OEM skirts need to be removed for installation. Although fitting is quite straight forward we do always recommend using a trained professional to undertake the install. We estimate around 30 minutes to fit.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003elowered side-profile design\u003c\/strong\u003e — lowered side-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon fiber\u003c\/strong\u003e — finish that pairs cleanly with factory paint and trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon fiber\u003c\/strong\u003e — lightweight motorsport material with a clear carbon weave look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet \/ pair where listed\u003c\/strong\u003e — confirm whether the listing includes left and right pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eDesigned for the \u003cstrong\u003eFerrari SF90\u003c\/strong\u003e. Confirm your facelift \/ bumper style before ordering; send a photo of the install area if you want a fitment check.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits: Ferrari SF90 with the compatible factory mounting\u003c\/li\u003e\n\u003cli\u003eConfirm this is the correct side skirt for your bumper \/ chassis generation\u003c\/li\u003e\n\u003cli\u003eVariants: pre-peg carbon (extra light with line structure), forged carbon (extra light with marble structure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart\u003c\/td\u003e\n\u003ctd\u003eSide Skirt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eFerrari SF90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall\u003c\/td\u003e\n\u003ctd\u003eConfirm install method for your chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhy upgrade\u003c\/h3\u003e\n\u003cp\u003eSide skirts \/ rockers tighten the gap along the profile and make the Ferrari SF90 look lower and more purposeful — a clean aero change that reads clearly in photos.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdetails open\u003e\n\u003csummary\u003eWill this fit my Ferrari?\u003c\/summary\u003e\n\u003cp\u003eIt is made for the \u003cstrong\u003eFerrari SF90\u003c\/strong\u003e. Other generations use different geometry and will not fit — always match chassis code, year, and facelift \/ bumper style.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it real carbon fiber?\u003c\/summary\u003e\n\u003cp\u003eThis version is listed as \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e. Material called out in the listing: \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it replace the whole bumper?\u003c\/summary\u003e\n\u003cp\u003eUsually no — this is the listed side skirt only, not an entire vehicle reskin. It is intended to work with the OEM mounting concept when fitment matches.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDo I need a body shop to install it?\u003c\/summary\u003e\n\u003cp\u003eMany owners have a body shop or detailing shop handle the install so panel gaps and fasteners are set correctly. Experienced DIY installers can also complete straightforward direct-fit pieces with care and the right tools.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow can I confirm fitment before I buy?\u003c\/summary\u003e\n\u003cp\u003eMessage CarGym with your model year, chassis code, and a clear photo of the install area — we will confirm compatibility before you order.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it in stock?\u003c\/summary\u003e\n\u003cp\u003eThis is made to order and takes 3-4 weeks to ship out after order confirmation.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cp\u003eShop this DMC Ferrari SF90 Carbon Fiber Side Skirts fit the OEM Coupe \u0026amp; Spider Stradale \u0026amp; Assetto Fiorano at \u003cstrong\u003eCarGym\u003c\/strong\u003e with worldwide shipping and payment in all major currencies.\u003c\/p\u003e","brand":"DMC","offers":[{"title":"pre-peg carbon (extra light with line structure)","offer_id":42624976879772,"sku":null,"price":43000.0,"currency_code":"HKD","in_stock":true},{"title":"forged carbon (extra light with marble structure)","offer_id":42624976912540,"sku":null,"price":56100.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0566\/6534\/2108\/files\/SF90_CarbonFiber_SideSkirts.jpg?v=1791480078"},{"product_id":"dmc-ferrari-sf90-stradale-forged-carbon-fiber-front-bumper-center-ducts-air-tunnel-fits-the-oem-coupe-spider-assetto-fiorano-2","title":"DMC Ferrari SF90 Stradale Forged Carbon Fiber Front Bumper Center Ducts Air Tunnel fits the OEM Coupe \u0026 Spider \u0026 Assetto Fiorano","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe iconic DMC Front Duct for the Ferrari SF90, made from Carbon Fiber. DMC products are certified by TUV, a German government approved authority for car safety standards. This product is not yet ready, but please contact us about its status.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe new SF90 is a superb looking car however from a distance with the softer curves than the its LaFerrari sibling, it can look a little tame. We aim to change that with our new range of Ferrari SF90 Carbon. The DMC Carbon Duct really is the finisher to any cars front fascia. The SF90 Stradale from factory has quite a tame looking front fascia, that really doesn’t do a proper Ferrari any justice. The DMC carbon creation fits into the factory design, and a more aggressive look. It is absolutely integrated with the OEM lines, not looking aftermarket at all.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Carbon Fiber Duct is made up with lightweight and strong Carbon Fiber, produced via vacuum infusion giving both great strength and superior finish. Once the part has been produced and pulled from the mould, it is checked and tested thoroughly before heading to lacquer. Each part is inspected further and checked for tolerances before being hand and machine polished, followed by being waxed and sealed in with high content Carnauba products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a replacement part, the OEM bumper needs to be removed for installation. Although fitting is quite straight forward we do always recommend using a trained professional to undertake the install. We estimate around 30 minutes to fit.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGel Coat:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDMC Products come with a free Gloss or Matte Coating on all Carbon Fiber items, please leave a note at check out which one you like. If you don’t specify we will add a gloss base layer. However we suggest you to add one additional layer to match your country’s local UV and weather requirements as they differ throughout the world. We also suggest to wax, polish and seal the item further, even though we include a base seal of high quality carnauba product. This can be protective in regions that have high humidity or rain.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it in stock?\u003c\/summary\u003e\n\u003cp\u003eThis is made to order and takes 3-4 weeks to ship out after order confirmation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cp\u003eShop this DMC Ferrari SF90 Stradale Forged Carbon Fiber Front Bumper Center Ducts Air Tunnel fits the OEM Coupe \u0026amp; Spider \u0026amp; Assetto Fiorano at \u003cstrong\u003eCarGym\u003c\/strong\u003e with worldwide shipping and payment in all major currencies.\u003c\/p\u003e\n","brand":"DMC","offers":[{"title":"PRE-PEG CARBON (EXTRA LIGHT WITH LINE STRUCTURE)","offer_id":42655035392156,"sku":null,"price":16400.0,"currency_code":"HKD","in_stock":true},{"title":"FORGED CARBON (EXTRA LIGHT WITH MARBLE STRUCTURE)","offer_id":42655035424924,"sku":null,"price":21800.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0566\/6534\/2108\/files\/DMC_Ferrari_SF90_Stradale_Carbon_Fiber_Front_Bumper_Center_Duct_Air_Tunnel_01.jpg?v=1791480717"},{"product_id":"dmc-ferrari-sf90-stradale-forged-carbon-fiber-front-lip-spoiler-splitters-fit-the-oem-coupe-spider-assetto-fiorano","title":"DMC Ferrari SF90 Stradale Forged Carbon Fiber Front Lip Spoiler Splitters fit the OEM Coupe \u0026 Spider \u0026 Assetto Fiorano","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\n\u003cp\u003eGive your Ferrari SF90 Stradale a more planted, motorsport-inspired front aero presence with this front splitter. The carbon fiber finish delivers a high-impact appearance upgrade grounded in the facts listed for this product.\u003c\/p\u003e\n\u003cp\u003eBuilt with a durable \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e construction, finished in \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eInstall\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThis is a replacement part, the OEM bumper needs to be removed for installation. Although fitting is quite straight forward we do always recommend using a trained professional to undertake the install. We estimate around 120 minutes to fit.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003esharper front aero presence design\u003c\/strong\u003e — sharper front aero presence\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon fiber\u003c\/strong\u003e — finish that pairs cleanly with factory paint and trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon fiber\u003c\/strong\u003e — lightweight motorsport material with a clear carbon weave look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet \/ pair where listed\u003c\/strong\u003e — confirm whether the listing includes left and right pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eDesigned for the \u003cstrong\u003eFerrari SF90 Stradale\u003c\/strong\u003e. Confirm your facelift \/ bumper style before ordering; send a photo of the install area if you want a fitment check.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits: Ferrari SF90 Stradale with the compatible factory mounting\u003c\/li\u003e\n\u003cli\u003eConfirm this is the correct front splitter for your bumper \/ chassis generation\u003c\/li\u003e\n\u003cli\u003eVariants: PRE-PEG CARBON (EXTRA LIGHT WITH LINE STRUCTURE), FORGED CARBON (EXTRA LIGHT WITH MARBLE STRUCTURE)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart\u003c\/td\u003e\n\u003ctd\u003eFront Splitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eFerrari SF90 Stradale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall\u003c\/td\u003e\n\u003ctd\u003eConfirm install method for your chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhy upgrade\u003c\/h3\u003e\n\u003cp\u003eStock front bumpers often leave a tall gap at the nose. A styled front lip or splitter is one of the highest-impact aero upgrades for the Ferrari SF90 Stradale: it lowers the visual stance, photographs well, and stays reversible if you keep the original piece.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdetails open\u003e\n\u003csummary\u003eWill this fit my Ferrari?\u003c\/summary\u003e\n\u003cp\u003eIt is made for the \u003cstrong\u003eFerrari SF90 Stradale\u003c\/strong\u003e. Other generations use different geometry and will not fit — always match chassis code, year, and facelift \/ bumper style.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it real carbon fiber?\u003c\/summary\u003e\n\u003cp\u003eThis version is listed as \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e. Material called out in the listing: \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it replace the whole bumper?\u003c\/summary\u003e\n\u003cp\u003eUsually no — this is the listed front splitter only, not an entire vehicle reskin. It is intended to work with the OEM mounting concept when fitment matches.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDo I need a body shop to install it?\u003c\/summary\u003e\n\u003cp\u003eMany owners have a body shop or detailing shop handle the install so panel gaps and fasteners are set correctly. Experienced DIY installers can also complete straightforward direct-fit pieces with care and the right tools.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow can I confirm fitment before I buy?\u003c\/summary\u003e\n\u003cp\u003eMessage CarGym with your model year, chassis code, and a clear photo of the install area — we will confirm compatibility before you order.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it in stock?\u003c\/summary\u003e\n\u003cp\u003eThis is made to order and takes 3-4 weeks to ship out after order confirmation.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cp\u003eShop this DMC Ferrari SF90 Stradale Forged Carbon Fiber Front Lip Spoiler Splitters fit the OEM Coupe \u0026amp; Spider \u0026amp; Assetto Fiorano at \u003cstrong\u003eCarGym\u003c\/strong\u003e with worldwide shipping and payment in all major currencies.\u003c\/p\u003e","brand":"DMC","offers":[{"title":"PRE-PEG CARBON (EXTRA LIGHT WITH LINE STRUCTURE)","offer_id":42655046500508,"sku":null,"price":25700.0,"currency_code":"HKD","in_stock":true},{"title":"FORGED CARBON (EXTRA LIGHT WITH MARBLE STRUCTURE)","offer_id":42655046566044,"sku":null,"price":33500.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0566\/6534\/2108\/files\/DMC_Ferrari_SF90_Stradale_Carbon_Fiber_Front_Bumper_Center_Duct_Air_Tunnel_01_e3442932-a30e-45a1-a03e-13930baa485d.jpg?v=1791480718"},{"product_id":"dmc-ferrari-sf90-stradale-forged-carbon-fiber-rear-deck-lid-assetto-fiorano-package-engine-spoiler-trunk-lip-wing-for-the-oem-coupe-spider","title":"DMC Ferrari SF90 Stradale: Forged Carbon Fiber Rear Deck Lid: Assetto Fiorano Package Engine Spoiler Trunk Lip Wing for the OEM Coupe \u0026 Spider","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\n\u003cp\u003eGive your Ferrari SF90 Stradale a stronger rear wing \/ spoiler presence with this rear wing. The carbon fiber finish delivers a high-impact appearance upgrade grounded in the facts listed for this product.\u003c\/p\u003e\n\u003cp\u003eBuilt with a durable \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e construction, finished in \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eInstall\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThis is a replacement part: The SF90 Stradale Deck lif needs to be removed for installation. Although fitting is quite straight forward we do always recommend using a trained professional to undertake the install. We estimate around 60 minutes to fit.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003edownforce-inspired rear design\u003c\/strong\u003e — downforce-inspired rear look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon fiber\u003c\/strong\u003e — finish that pairs cleanly with factory paint and trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon fiber\u003c\/strong\u003e — lightweight motorsport material with a clear carbon weave look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet \/ pair where listed\u003c\/strong\u003e — confirm whether the listing includes left and right pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eDesigned for the \u003cstrong\u003eFerrari SF90 Stradale\u003c\/strong\u003e. Confirm your facelift \/ bumper style before ordering; send a photo of the install area if you want a fitment check.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits: Ferrari SF90 Stradale with the compatible factory mounting\u003c\/li\u003e\n\u003cli\u003eConfirm this is the correct rear wing for your bumper \/ chassis generation\u003c\/li\u003e\n\u003cli\u003eVariants: REAR WING (CENTRE) PRE-PEG, DUCKTAIL SPOILER PRE-PEG, REAR WING AND DUCKTAIL PRE-PEG, REAR WING FORGED, DUCKTAIL SPOILER FORGED, REAR WING AND DUCKTAILFORGED\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart\u003c\/td\u003e\n\u003ctd\u003eRear Wing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eFerrari SF90 Stradale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall\u003c\/td\u003e\n\u003ctd\u003eConfirm install method for your chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhy upgrade\u003c\/h3\u003e\n\u003cp\u003eA rear spoiler or wing changes the silhouette of the Ferrari SF90 Stradale immediately. It is a classic aero upgrade that stays reversible if you retain the factory lid \/ deck.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdetails open\u003e\n\u003csummary\u003eWill this fit my Ferrari?\u003c\/summary\u003e\n\u003cp\u003eIt is made for the \u003cstrong\u003eFerrari SF90 Stradale\u003c\/strong\u003e. Other generations use different geometry and will not fit — always match chassis code, year, and facelift \/ bumper style.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it real carbon fiber?\u003c\/summary\u003e\n\u003cp\u003eThis version is listed as \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e. Material called out in the listing: \u003cstrong\u003eCarbon fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it replace the whole bumper?\u003c\/summary\u003e\n\u003cp\u003eUsually no — this is the listed rear wing only, not an entire vehicle reskin. It is intended to work with the OEM mounting concept when fitment matches.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDo I need a body shop to install it?\u003c\/summary\u003e\n\u003cp\u003eMany owners have a body shop or detailing shop handle the install so panel gaps and fasteners are set correctly. Experienced DIY installers can also complete straightforward direct-fit pieces with care and the right tools.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow can I confirm fitment before I buy?\u003c\/summary\u003e\n\u003cp\u003eMessage CarGym with your model year, chassis code, and a clear photo of the install area — we will confirm compatibility before you order.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it in stock?\u003c\/summary\u003e\n\u003cp\u003eThis is made to order and takes 3-4 weeks to ship out after order confirmation.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cp\u003eShop this DMC Ferrari SF90 Stradale: Forged Carbon Fiber Rear Deck Lid: Assetto Fiorano Package Engine Spoiler Trunk Lip Wing for the OEM Coupe \u0026amp; Spider at \u003cstrong\u003eCarGym\u003c\/strong\u003e with worldwide shipping and payment in all major currencies.\u003c\/p\u003e","brand":"DMC","offers":[{"title":"REAR WING (CENTRE) PRE-PEG","offer_id":42655050629276,"sku":null,"price":17100.0,"currency_code":"HKD","in_stock":true},{"title":"DUCKTAIL SPOILER PRE-PEG","offer_id":42655050825884,"sku":null,"price":38200.0,"currency_code":"HKD","in_stock":true},{"title":"REAR WING AND DUCKTAIL PRE-PEG","offer_id":42655050858652,"sku":null,"price":55400.0,"currency_code":"HKD","in_stock":true},{"title":"REAR WING FORGED","offer_id":42655050891420,"sku":null,"price":21800.0,"currency_code":"HKD","in_stock":true},{"title":"DUCKTAIL SPOILER FORGED","offer_id":42655050924188,"sku":null,"price":49900.0,"currency_code":"HKD","in_stock":true},{"title":"REAR WING AND DUCKTAILFORGED","offer_id":42655050956956,"sku":null,"price":71700.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0566\/6534\/2108\/files\/DMC_Fiorano_Package_SF90_Stradale_Rear_Wing_Spoiler_Deck_lid_01.jpg?v=1791480718"}],"url":"https:\/\/cargym.com\/it\/collections\/ferrari-sf90-body-kit.oembed","provider":"CarGym","version":"1.0","type":"link"}